banner
banner
banner
banner
banner

AF50M-330050 50kVA Frequency Converter

ACSOON AF50M-330050 three-phase cabinet frequency converter. The 50kVA model has a front-panel digital display; input and output electrical ratings are specified for the installation.
Send Inquiry Download
  • Product Description

AF50M-330050 Three-Phase Frequency Converter

The ACSOON AF50M-330050 is a cabinet AC power source identified as a 50 kVA, three-phase input and three-phase output frequency converter. The available site supply, desired output and connected load determine its final electrical configuration. The model datasheet does not assign a universal input or output voltage and frequency to every order, so those values should be confirmed on the quotation.

Where it helps

Equipment moved between electrical systems may need a specified output frequency and voltage that the site mains cannot provide directly. A dedicated cabinet allows the buyer to define that output for a three-phase load, while accounting for continuous demand, starting current and installation conditions. For a fluctuating supply, state the actual input range instead of assuming a fixed nominal value will cover it.

Confirmed model information

ParameterAF50M-330050
Rated capacity50 kVA (model designation; confirm duty and available load rating)
AC inputThree-phase; voltage and frequency to be confirmed for the site
AC outputThree-phase; target voltage and frequency to be specified
InstallationCabinet enclosure
Operator interfaceFront-panel digital display

Product and Jerrystar advantages

  • A defined three-phase output helps match the equipment's nameplate and test or operating requirement.
  • Cabinet installation keeps the input, output and operator interface in a dedicated power system.
  • Xi'an Jerrystar Instrument manufactures ACSOON power products and can review the input range, output setpoint, load and installation before confirming the configuration.

What to send for selection

  1. Site line-to-line voltage, frequency, phase arrangement and expected variation.
  2. Required output line-to-line voltage and frequency, plus tolerance if specified by the equipment maker.
  3. Load nameplate kVA/kW, power factor, continuous current, starting current and duty cycle.
  4. Cabinet space, ambient conditions, cable routing, connection and control requirements.

FAQ

Does the model always convert 50 Hz to 60 Hz? Do not infer the direction from the AF50M designation. State the actual input and required output frequencies so the configured unit can be confirmed.

Is 50 kVA equal to 50 kW? No. Real power depends on the load power factor; send both the load data and starting behavior for sizing.

Can it be used with an unstable generator? Provide the measured voltage and frequency variation and load transients. Jerrystar can assess the suitable configuration rather than assuming the cabinet covers every generator condition.

How is this different from a programmable AC test source? If repeated voltage and frequency sequences or two separately specified outputs are needed, compare the ACSW dual-output programmable source.

For related series information see the JRD AF50 family page and the ACSOON AF50W series reference; the latter is a different series and its ratings must not be substituted for AF50M-330050. Send your electrical specification to Jerrystar for a model-specific quotation.

Online Message
Learn about our latest products through SMS or email