banner
banner
banner
banner
banner
banner

ACF400M-330030 30kVA 400Hz AC Source

ACSOON ACF400M-330030 30kVA three-phase 400Hz AC source for avionics bench and equipment tests. Datasheet ratings: 380V ±15% three-phase input; 115V line-to-neutral, 400Hz output.
Send Inquiry Download
  • Product Description

ACF400M-330030 400 Hz Touchscreen AC Source

ACSOON ACF400M-330030 converts a three-phase 50/60 Hz site supply into 400 Hz AC for avionics benches and electrical equipment checks. This 30 kVA cabinet has a touchscreen behind a hinged cover and a separate emergency stop. The electrical ratings below are transcribed from the photographed unit nameplate; they describe this configuration rather than every ACF400M series option.

Problems addressed

  • Standard plant mains cannot directly supply a 400 Hz test load. A dedicated frequency converter provides the specified 400 Hz source.
  • Bench setups need a clear distinction between line-to-neutral and line-to-line voltage. The nameplate identifies the 115 V value as line-to-neutral.
  • Selection from series-level brochures alone can misstate the actual cabinet. The nameplate values below anchor the equipment discussion.

ACF400M-330030 nameplate ratings

ParameterRating
ModelACF400M-330030
Rated capacity30 kVA
AC input voltage380 V ±15% line-to-line, three-phase
Input frequency / current50/60 Hz; 57 A
AC output voltage115 V line-to-neutral, three-phase
Output frequency / current400 Hz; 83.3 A
Operator panelTouchscreen with hinged cover; separate emergency stop

Product and supplier advantages

The cabinet makes 400 Hz AC available for controlled equipment and avionics test work. The operator can see the local touchscreen, while the separate emergency stop supports a clear shutdown action. The ACF400M series technical specification describes isolated output and protection/alarm functions, but any required option, interface or performance acceptance criterion should be confirmed for this exact cabinet. Xi'an Jerrystar Instrument manufactures ACSOON power products and can review the load, wiring and factory test documentation with the buyer.

Applications and selection notes

Typical applications include avionics benches, electronics testing and equipment checks that need 400 Hz AC. For a quote, provide site mains voltage, frequency and phase; load nameplate and continuous/starting current; the required output connector and whether the load needs neutral; cabinet clearance, ambient conditions and communication needs. A 400 Hz laboratory source should be specified against the equipment load; for aircraft external power at a hangar or gate, compare a dedicated GPU400 vertical cabinet with the aircraft cable and connector requirements.

FAQ

Is 115 V the phase voltage? Yes, the photographed nameplate specifies 115 V line-to-neutral for this three-phase unit. Confirm the complete output wiring and connector before installation.

Can it be ordered with a different input or output? The broader ACF400M series lists other configurations. Treat this page's values as the ACF400M-330030 nameplate ratings and request a separate approved specification for a different build.

Is its output frequency adjustable? The series document lists 300–500 Hz or customized options. The photographed model is rated at 400 Hz; confirm adjustable range and control interface for this exact unit before including them in a purchase specification.

How should 30 kVA be sized against a test load? Check continuous and starting current, power factor and duty cycle. Do not equate kVA directly with kW.

Compare the ACSW programmable test source for repeated voltage/frequency sequences and the AF50M three-phase converter for a separately specified lower-frequency application. The ACSOON programmable series is another selection reference. Send the load profile to Jerrystar for a configuration check.

Online Message
Learn about our latest products through SMS or email